Crane points to note

Since lifting is special equipment, with a higher risk characteristics, therefore, the installation of the  gantry crane  , the security is especially important to pay particular attention to the following aspects:
        (A) the crane structure are mostly large institutional complex mechanical devices, it is often difficult overall transport is often split after shipping the equipment to use the site as a whole assembly. Therefore, it is necessary in order to reflect properly installed crane overall eligibility to test the integrity of the whole crane and integrity.
        (2) cranes are in use venues or buildings orbit. Therefore, its orbit or install base, and the crane itself, is able to complement each other well, and the ability to run whether they can adapt to meet strict requirements, must go through the proper installation and post-installation commissioning and testing concluded .
        (3) Cranes high security requirements, safety devices must be complete and properly installed, in order to achieve a reliable, flexible, and accurate technical requirements.
        (4) based on the importance of safe working  bridge gantry crane   the crane was put into use in order to meet the operational requirements of various loads, it must be conducted according to the provisions of the crane load, full load, overload static and dynamic load tests. These tests must be the operating state of the crane mechanism or specific for a stationary state. This requires the crane load test after installation only after the transfer of use.
        (5) the crane wire rope and other flexible member, and many other parts will occur in some of the initial elongation under load, deformation, loosening. It also requires the crane crane installation, commissioning loaded after correction for repair, adjustment, handling and fastening. Therefore, we must do a good job crane installation, commissioning, speed and a series of work in order to ensure the future safety of the  hoist gantry crane  normally used.